Audio Settings

DM-NAX-8ZSA

Tap the gear button next to the device name to display a Settings dialog box for the sensor device. The About tab is selected and displays the device information. The Settings dialog box has additional tabs for Connections, Setup and Test.

Configure the DM-NAX-8ZSA using the web interface. To configure, select Web Configuration.

Connections

Use the Connections tab to view the connections made to the versiports on the device.

Setup

Use the Setup tab to set the multicast address. The range of multicast addresses starts at the value that is entered.

To set the multicast address, enter the multicast address and then select Apply.

Update

Use the Update tab to update the device firmware.

  • Current Version: Displays the current firmware version for the gateway.
  • Available Version: Displays the available firmware version for the gateway.
  • Update: If a firmware update is available, tap Update to update the firmware.
  • Check For Update: Tap the Check For Update button to search for firmware updates for the gateway.

DM-NAX-16AIN

Tap the gear button next to the device name to display a Settings dialog box for the sensor device. The About tab is selected and displays the device information. The Settings dialog box has additional tabs for Setup and Update.

Configure the DM-NAX-16AIN using the web interface. To configure, select Web Configuration.

Setup

Use the Setup tab to set the multicast address. The range of multicast addresses starts at the value that is entered.

To set the multicast address, enter the multicast address and then select Apply.

Update

Use the Update tab to update the device firmware.

  • Current Version: Displays the current firmware version.
  • Available Version: Displays the available firmware version.
  • Update: Active when a firmware update is available. To update the firmware, select Update.
  • Check For Update: To search for a firmware update, select Check for Update.