Gateway Settings

CEN-GWEXER Settings

Tap the gear button next to the device name to display a Settings dialog box for the gateway. The About tab is selected and displays the device information. The Settings dialog box has additional tabs for Devices, Channel, Update, and Replace Device.

PanId: The PanId is transferred to the new gateway when the Replace Device function is performed on a gateway. This ensures that wireless devices come online and communicate with the new gateway. If the old gateway is not removed, the PanId text turns red to indicate that there are duplicate PanIds in the system. Duplicate PanIds cannot exist in the same system. Remove the old gateway from the system.

Devices

Use the Devices tab to view the devices that are acquired to the gateway. The list of devices include the device name, serial number, device type, room, and network status for each device.

Channel

Use the Channel tab to view and configure the RF channel assigned to the gateway.

  • Current Gateway Channel: Displays the current gateway channel.
  • Set Gateway Channel: To change the gateway channel, select a channel and then select Set Channel.

Update

Use the Update tab to update the device firmware.

  • Current Version: Displays the current firmware version for the gateway.
  • Available Version: Displays the available firmware version for the gateway.
  • Update: If a firmware update is available, tap Update to update the firmware.
  • Check For Update: Tap the Check For Update button to search for firmware updates for the gateway.

Replace Device

Use the Replace Device tab to replace the device and retain the current settings.

CEN-GW1 Settings

Tap the gear button next to the device name to display a Settings dialog box for the gateway. The About tab is selected and displays the device information. The Settings dialog box has additional tabs for Devices, Channel, Update, and Replace Device.

Configure the CEN-GW1 using the web interface. To configure, select Web Configuration.

PanId: The PanId is transferred to the new gateway when the Replace Device function is performed on a gateway. This ensures that wireless devices come online and communicate with the new gateway. If the old gateway is not removed, the PanId text turns red to indicate that there are duplicate PanIds in the system. Duplicate PanIds cannot exist in the same system. Remove the old gateway from the system.

Devices

Use the Devices tab to view the devices that are acquired to the gateway. The list of devices include the device name, serial number, device type, room, and network status for each device.

Channel

Use the Channel tab to view and configure the RF channel assigned to the gateway.

Current Gateway Channel: Displays the current channel for the selected gateway.

To set the infiNET EX radio channel:

  1. Select EX from the Selected Radio drop-down menu.
  2. Select a channel from the channel list.
  3. Select Set Channel.

To scan the wireless network and automatically assign the best RF channel, select Auto Select Channel.

To manually set the SG radio channel:

  1. Select SG from the Selected Radio drop-down menu.
  2. Select a channel from the channel list.
  3. Select Set Channel.

Update

Use the Update tab to update the device firmware.

  • Current Version: Displays the current firmware version for the gateway.
  • Available Version: Displays the available firmware version for the gateway.
  • Update: If a firmware update is available, tap Update to update the firmware.
  • Check For Update: Tap the Check For Update button to search for firmware updates for the gateway.

Replace Device

Use the Replace Device tab to replace the device and retain the current settings.

DIN‑DALI‑2 Settings

Tap the gear button next to the device name to display a Settings dialog box for the DIN-DALI-2. The About tab is selected and displays the device information. The Settings dialog box has additional tabs for Devices, Update, and Replace Device.

NOTE: The Cresnet® communication port on the DIN-DALI-2 cannot be used in the Crestron Home system. Do not make connections to this port.

The DALI configuration stored on the DIN‑DALI‑2 is imported into the Crestron Home system when the DIN‑DALI‑2 is added. If there were changes to the DALI configuration, tap the Reload Configuration button.

Devices

Tap the Devices tab to view the ballasts that are connected to the DIN-DALI-2. The list includes the DALI loop and group number and the group name and room that is assigned in the Crestron Home Setup app. It also displays the status for each group. The list also includes the short and long fixture identifiers and the ballast name.

NOTE: The fixture number starts at 0.

Update

Use the Update tab to update the device firmware.

  • Current Version: Displays the current firmware version for the gateway.
  • Available Version: Displays the available firmware version for the gateway.
  • Update: If a firmware update is available, tap Update to update the firmware.
  • Check For Update: Tap the Check For Update button to search for firmware updates for the gateway.

Replace Device

Tap the Replace Device tab to replace the DIN‑DALI‑2.

NOTE: The DALI ballast settings must be restored on the replacement DIN-DALI-2 prior to adding it to the system. The replacement DIN-DALI-2 must be connected to the same DALI loops as the original device.

DIN-GWDL Settings

Tap the gear button next to the device name to display a Settings dialog box for the gateway.

Configure the DIN-GWDL using the web interface. To configure, select Web Configuration.

Devices

Use the Devices tab to view the devices that are acquired to the gateway. The list of devices include the device name, serial number, device type, room, and network status for each device.

Replace Device

Use the Replace Device tab to replace the device and retain the current settings.

Health

Use the Health tab to configure the Health Dashboard settings. For details, refer to Health Settings.