Third-Party Keypad Settings
Configure Basalte Keypads
Tap the gear button 
next to the device name to display a Settings dialog box for the device. The About tab is selected and displays the device information.
Layouts
Tap the Layouts tab to configure the keypad layout. Select the number of buttons that are on the keypad.
Night Light
Tap the Night Light tab to configure the night light. Select the Night Light On check box to enable the light and then select a color from the Night Light Color list.
Configure Black Nova Keypads
Tap the gear button next to the device name to display a Settings dialog box for the device. The About tab is selected and displays the device information.
Layouts
Tap the Layouts tab to configure the keypad layout. Select the number of buttons that are on the keypad.
Alba 2-Button Layout
|
L2R2
|
L2R1
|
L1R2
|
Alba 4-Button Layout
|
L4R4
|
L2R4
|
L4R2
|
|
L2R2
|
L6R4
|
L4R6
|
|
L6R2
|
L2R6
|
L6R6
|
Alba 8-Button Layout
|
L4R4
|
L4R5
|
L5R4
|
|
L5R5
|
L6R4
|
L4R6
|
|
A8-L6R5
|
L5R6
|
L6R6
|
Alba M1
|
L3R3
|
L3R2
|
L2R3
|
|
L2R2
|
Aria 9
Aria 12
Aria M1
Aria TT
Buzzer
Tap the Buzzer tab to activate the buzzer feedback for the keypad. To use the buzzer, select Activate buzzer feedback.
LED
Tap the LED tab to configure the LEDs.
Set the Sleep Mode LED Intensity
To set the LED brightness when the keypad enters Sleep mode, select an LED intensity between 1 and 100.
Set the Color for all LEDs
- Select the Set All check box.
- Tap Active or Inactive to set the LED color for the Active or Inactive LED state.
-
Select the color.
NOTE: The Hue must be set prior to setting the color.
-
Tap OK.
Set the Color for Individual LEDs
- Deselect the Set All check box.
- Select a button in the Active or Inactive column.
-
Select the color.
NOTE: The Hue must be set prior to setting the color.
-
Tap OK.
Custom Display
Tap the Custom Display tab to select which thermostat the Black Nova keypad display should reflect.
The Black Nova Keypad will display the following from the selected thermostat:
• Current temperature
• Mode
• Fan speed (represented with zero to six bars, depending on device capabilities)
• Current setpoint (displayed for five seconds upon a change)
• Humidity level (displayed for five seconds upon a change)
Select Celsius, Fahrenheit, or Auto for the Temperature Scale. Auto uses the same scale as the thermostat.
Replace Device
Use the Replace Device tab to replace the device and retain the current settings.
Actions for Black Nova Keypads
To control a Crestron thermostat from a Black Nova keypad, follow the steps below.
Note: The temperature and humidity sensors on the Black Nova keypad cannot be used as remote sensors for Crestron thermostats. Use a CHV-RTS or CHV-RTHS.
-
Create a Quick Action for the desired effect, such as Thermostat Setpoint Up or Thermostat Setpoint Down. Refer to Quick Actions for instructions.
-
Program the Black Nova keypad to trigger the Quick Action. Refer to Configure Other Keypads for instructions.
-
Hide the Quick Action so that it does not appear in the room.
The Black Nova keypad button will now perform the selected Quick Action. Repeat this process for each button.
Configure Arkadia Keypads
Tap the gear button next to the device name to display a Settings dialog box for the device. The About tab is selected and displays the device information.
Layouts
Tap the Layouts tab to configure the keypad layout. Select the number of buttons that are on the keypad.
Perimetral Light
Tap the Perimetral Light tab to configure the perimetral light. Select the Perimetral Light On check box to enable the light and then select a color from the Perimetral Color list.
Configure Vitrea Keypads
Tap the gear button next to the device name to display a Settings dialog box for the device. The About tab is selected and displays the device information.
Backlight
Tap the Backlight tab to configure the backlight intensity. Use the up and down arrows to set the backlight intensity.
Layouts
Tap the Layouts tab to configure the keypad layout. Select the number of buttons that are on the keypad.
