Keypad Button Programming
The buttons on Crestron and third-party keypads (including certain hand-held remotes) can be assigned actions based on the type of button press that is performed (tap, double tap, press and hold, and multi-tap) and the button mode assigned to the button.
The available button presses and button modes are based on the keypad model and the assigned button mode. For details, refer to Keypad Button Press Support and Keypad Button Modes and Button Functions.
Keypad Button Press Support
Crestron and third-party keypads (including certain hand-held remotes) can support tap, double tap, press and hold, and multi-tap functions. Refer to the table that follows for a list of keypads and the button presses that they support.
| Device | Tap | Double Tap | Press and Hold | Multi-Tap |
|---|---|---|---|---|
| C2N-CBD-E |
|
|
|
|
| C2N-CBD-P |
|
|
|
|
| C2N-CBF-P |
|
|
|
|
| C2N-UNI8IO |
|
|
|
|
| C2NI-CB |
|
|
|
|
| CLW-DELVEX-E |
|
|
|
|
| CLW-DELVEX-P |
|
|
|
|
| CLW-DIMEX-E |
|
|
|
|
| CLW-DIMEX-P |
|
|
|
|
| CLW-DIMFLVEX-P |
|
|
|
|
| CLW-DIMSWEX-E |
|
|
|
|
| CLW-DIMSWEX-P |
|
|
|
|
| CLW-DIMUEX-E |
|
|
|
|
| CLW-DIMUEX-P |
|
|
|
|
| CLW-SWEX-277-P |
|
|
|
|
| CLW-SWEX-230-E |
|
|
|
|
| CLW-SWEX-230-P |
|
|
|
|
| CLW-SWEX-E |
|
|
|
|
| CLW-SWEX-P |
|
|
|
|
| CLWI-1SW2EX |
|
|
|
|
| CLWI-DIMFLVEX |
|
|
|
|
| CLWI-DIMUEX |
|
|
|
|
| CLWI-DIMUNEX |
|
|
|
|
| CLWI-KPLCN |
|
|
|
|
| CLWI-KPLEX |
|
|
|
|
| CLWI-KPLEX-BATT |
|
|
|
|
| CLWI-SWEX |
|
|
|
|
| CNX-B2 |
|
|
|
|
| CNX-B4 |
|
|
|
|
| CNX-B6 |
|
|
|
|
| CNX-B8 |
|
|
|
|
| CNX-B12 |
|
|
|
|
| HR-310 |
|
|
|
|
| HR-150 |
|
|
|
|
| HR-100 |
|
|
|
|
| HTT-B2EX-BATT |
|
|
|
|
| HTT-B10EX |
|
|
|
|
| HZ-DIMEX |
|
|
|
|
| HZ-DIMLVEX |
|
|
|
|
| HZ-DIMUEX |
|
|
|
|
| HZ-KPCN |
|
|
|
|
| HZ-KPEX |
|
|
|
|
| HZ-SWEX |
|
|
|
|
| HZ2-DIMEX |
|
|
|
|
| HZ2-DIMLVEX |
|
|
|
|
| HZ2-DIMUEX |
|
|
|
|
| HZ2-KPCN |
|
|
|
|
| HZ2-KPEX |
|
|
|
|
| HZ2-SWEX |
|
|
|
|
| INET-CBDEX-E |
|
|
|
|
| INET-CBDEX-P |
|
|
|
|
| Third-Party Keypads |
|
|
|
|
Keypad Button Modes and Button Functions
Crestron and third-party keypads support different button functions based on the Button mode that is selected. For example, the Scene button mode supports Built-In Functionality and Multi button functions; the Quick Actions button mode supports Tap, Double, Hold, and Multi button functions; and the Shade Room button mode supports Tap and Press and Hold button functions. Each button mode and button function perform a defined action. Refer to the table that follows for a list of button modes and the button functions that they support.
NOTE: Every button on a keypad can be assigned to a different button mode.
| Button Mode | Button Function | Button Behavior |
|---|---|---|
| Scene | ||
|
Built-In Functionality: Tap: Recalls or switches the scene with the defined fade time. Double Tap: Immediately recalls or switches the scene. The fade time for the scene is bypassed.
Press and Hold: When Enable Dimming for Lights is enabled. Raise or lower the lights. The load raises or lowers based on the action that was performed last. If the load was turned on or raised, press and hold the button to lower the light level. To turn off the lights, continue holding the button after the minimum light level is reached. |
Always Recalls Scene: Recalls the scene. Toggles Scene/Off: Switches between scene on and off. Custom Toggle: Switches between the On Actions and Off Actions. Assign different scenes to the On Action and Off Action. |
|
|
Multi: Multiple button presses can recall up to 10 scenes and provide the ability to cycle through scenes. |
Not Available | |
| Quick Actions | ||
|
Tap: One button press to recall the quick action. Double: Two button presses to recall the quick action. Hold: Press and hold the button to recall the quick action. |
Not Available | |
| Multi: Multiple button presses can recall up to 10 quick actions and provide the ability to cycle through quick actions. | Not Available | |
| Lighting Load | ||
|
Tap: Increase or decrease (jog) the light level. Double Tap: Turns the lights on or off without fade time.
Press and Hold: Raise or lower the light level until the button is released or the maximum or minimum light level is reached. NOTE: To turn off the lights, continue holding the button after the minimum light level is reached. |
On/Raise/Off/Lower: Switches the load on or off or raises or lowers the lights. The lights turn on or off or raise or lower based on the action that was performed last. If the lights were turned on or raised, press the button to turn the lights off or press and hold the button to lower the lights. On/Raise: Turns the load on or raises the lights. Off/Lower: Turns the load off or lowers the lights. |
|
| Shade Load | ||
|
Tap: Open or close the shades.
Press and Hold: When Enable Press-and-Hold Functionality is enabled. Raise or lower the shades until the button is released or the upper or lower limit is reached. NOTE: To enable press-and-hold functionality, select the Enable Press-and-Hold Functionality check box. |
Open/Close: Switch the shades between open or closed. Open: Open the shades. Close: Close the shades. |
|
| Lighting Room | ||
|
Tap: Switches the lights on or off with the default fade time. Double Tap: Switches the lights on or off with no fade time.
Press and Hold: Raise or lower the lights until the button is released or the maximum or minimum light level is reached. NOTE: To turn off the lights, continue holding the button after the minimum light level is reached. |
Not Available | |
| Shade Room | ||
|
Tap: Open or close the shades. Press and Hold: Raise or lower the shades until the button is released or the upper or lower limit is reached. |
Not Available | |
| Lighting Raise and Lighting Lower | ||
|
Tap: Increase or decrease (jog) the light level. Double Tap: Turns the lights on or off with no fade time.
Press and Hold: Raise or lower the light level until the button is released or the maximum or minimum light level is reached. NOTE: To turn off the lights, continue holding the button after the minimum light level is reached. |
Not Available | |
| Shade Raise and Shade Lower | ||
|
Tap: Raise or lower (jog) the shades.
Press and Hold: Raise or lower the shades until the button is released or the upper or lower limit is reached. |
Not Available | |
| Ceiling Fan | ||
|
Tap: Control the ceiling fan. |
Cycle: Cycle through the available fan speeds. Each button press advances through the available fan speeds in the Available Speeds list. When the last speed in the list is reached, the next button press advances to the first option in the list.
Increase: Increase the fan speed until the maximum fan speed in the list is reached.
Decrease: Decrease the fan speed until the lowest fan speed in the list is reached. |
|
| Volume Raise and Volume Lower | ||
|
Tap: Raise or lower (jog) the volume. Press and Hold: Raise or lower the volume until the button is released or the maximum or minimum volume is reached. |
Not Available | |
| Master Raise and Master Lower | ||
|
Tap: Raise or lower (jog) the level for the device type. Press and Hold: Raise or lower the level for the device type until the button is released or the maximum or minimum level is reached. |
Not Available | |
| Media Function | ||
|
Tap: One button press to recall the media function. Double: Two button presses to recall the media function. Hold: Press and hold the button to recall the media function. Multi: Multiple button presses can recall up to 10 media functions and provide the ability to cycle through media functions. |
Not Available | |
| Button Emulation | ||
|
Tap: One button press to emulate the Lutron button. Press and Hold: Press and hold the button to emulate the Lutron button. |
Not Available | |
| External Function | ||
|
Tap: One button press to recall the external function. Double: Two button presses to recall the external function. P/R: Press and hold the button to recall the external function. The external function is stopped when the button is released. Multi: Multiple button presses can recall up to 10 external functions and provide the ability to cycle through external functions. |
Not Available | |