Scenes Tab

Use the Scenes tab to create light and shade scenes for the configuration. Scenes can be added, edited, and deleted.

Create a Lighting or Shading Scene

To create a scene:

  1. Select a room in the Scenes menu.
  2. Click  Add Lighting Scene or  Add Shading Scene.

  3. Configure the scene in the Lighting Scenes Options menu:

    • Scene Name: Enter a name for the scene.
    • Scene Fade Time: Lighting scenes only. Select the fade time from the drop-down menu.
    • Show Scene in: Select the scene visibility from the list box.
    • Check the box next to a load name to include it in the scene.

    • Use the controls for each load to set the levels.

      Tip: To view only the loads that are in the scene, turn on the Affected Loads toggle switch.

    Lighting Scene

    Shading Scene

Create a Climate Scene

To create a climate scene:

  1. Select a room in the Scenes menu.
  2. Click  Add Climate Scene.

  3. Configure the scene in the Climate Scenes Options menu:

    • Scene Name: Enter a name for the scene.
    • Available Thermostats: Select thermostats from the list to include them in the climate scene. Select a thermostat to configure the scene settings.

    • Schedule: Select a scheduling option:

      NOTE: If the thermostat schedule is running because Run or Unaffected was triggered by the scene, the next scheduled climate event will overwrite the climate scene's set points.

      • Run: Starts the schedule.
      • Hold: Pauses the schedule.
      • Unaffected: Does not change the current thermostat schedule.

    • Fan: Select a fan behavior:

      NOTE: Fan controls are not displayed:

      • If the thermostat does not support fan control.
      • If fan controls are hidden in the thermostat settings. For details, refer to Thermostat Settings.
      • Auto: Turns the fan on and off automatically.
      • On: Turns the fan on.
      • Keep Current Fan Setting : Does not change the fan setting.
    • Mode: Select a thermostat mode:
      • Off: Turns the thermostat off.
      • Cool: Sets the operating mode to cool.
      • Heat: Sets the operating mode to heat.
      • Auto: Sets the operating mode to auto.
      • Keep Current Mode: Does not change the current thermostat mode.
    • Adjust Setpoint(s): If this check box is selected, select a temperature set point for the  Heat,  Cool, and  Auto modes.

    Tip: To view only the thermostats that are in the scene, turn on the Show Selected Thermostats toggle switch.

    Climate Scene

Edit a Scene

To edit a scene:

  1. Select a scene in the Scenes menu.

  2. Configure the scene as described in Create a Lighting or Shading Scene and Create a Climate Scene.

    Tip: To view only the devices that are in the scene, turn on the Affected Loads or Show Selected Thermostats toggle switch.

Delete a Scene

To delete a scene:

  1. Select a scene in the Scenes menu and then click  Delete.
  2. To delete the scene, click Yes.