Lighting and Keypad Settings

Button Press Settings

• Wait For Double Tap: Tap the check box next to Wait For Double Tap to enable the wait for double tap function. The Wait for Double Tap function determines if the Crestron Home system triggers the Double Tap button action. The delay is the amount of time (in seconds) that the system waits after a button press to determine if a subsequent button press is a double tap. The values can be set between 0.2 and 1 second.

  For example:

  • Tap button action is set to route video to a bedroom.
  • Double Tap button action is set to route audio to a bedroom.

  When Wait for Double Tap is enabled:

  NOTE: The Tap button action is not triggered if the button is pressed twice within the delay time.

  • A single button press will route video to the bedroom if the room is off (Tap button action).
  • Two button presses will route audio to the bedroom (Double Tap button action).

  When Wait for Double Tap is disabled:

  NOTE: The Crestron Home system registers both the single and double button presses and triggers both actions.

  • A single button press will route video to the bedroom if the room is off (Tap button action).
  • Two button presses will route video to the bedroom if the room is off (Tap button action) and then will route audio to the bedroom if the room is off (Double Tap button action).
• Hold Time: The amount of time (in seconds) that a button must be pressed during a press-and-hold operation before the Hold button action is performed.
• Time Out: The amount of time (in hours, minutes, and seconds) that the system waits to determine if the Double Tap button action is performed.

Lighting Settings

Lighting Raise and Lower Rate(s): The amount of time (in seconds) over which the Crestron Home system raises or lowers the current light level to a recalled scene or discrete level.

To return to the previous screen, tap  Back.