Control Climate

Set the temperature throughout the house, or a different temperature in every room. To view and control:

  • All thermostats in the house: Tap the Climate tile on the Home screen. The Climate screen displays the current temperature, status, and temperature control for each thermostat.

  • A thermostat in a room: Tap a Room tile for a room that has a thermostat. The Room View displays the current temperature, status, and temperature control for the thermostat in the Services section.

Room Control - Thermostat Off

Room Control - Heat Cool System with Single Setpoint (Left) and Dual Setpoint (Right)

 

Room Control - Heat Only System (Left) and Cool Only System (Right)

 

Tap the thermostat name for additional thermostat controls.

Climate Controls - Single Setpoint (Fahrenheit - Left) and (Celsius -Right)

 

Climate Controls - Dual Setpoint (Fahrenheit - Left) and (Celsius -Right)

 

Set the Temperature

Slide the circular temperature gauge, or tap the + Raise and - Lower buttons, to change the temperature for the room.

Mode

NOTE: The configurable settings may vary depending on the thermostat functionality. For more information, refer to the thermostat documentation.

Tap Mode to set the operating mode for the thermostat. Typical options are Off, Cool, Heat, and Dual Auto.

  • Cool: Turn cooling mode on.
  • Heat: Turn heating mode on.
  • Dual Auto: Turns on heating or cooling mode based on the heat and cool temperatures that are selected.
  • Off: Turn the thermostat off

Fan

Tap Fan to set the fan mode. Typical options are Auto, On, Circulate Low, and Circulate Medium.

  • Auto: The fan turns on and off automatically when the heat or air conditioning is on.
  • On: The fan turns on to circulate air in the house.
  • Circulate Low: The fan turns on at low speed to circulate air in the house.
  • Circulate Medium: The fan turns on at medium speed to circulate air in the house.

Schedule

Tap Schedule to switch the schedule between Run and Hold.

  • Run: Starts the thermostat schedule.
  • Hold: Stops the thermostat schedule.

Create a Scheduled Climate Event

To create a new climate event in the user control interface:

  1. Select a thermostat from the drop‑down menu on the top left of the screen.

  2. Tap  Menu and then select Scheduled Events.

  3. Tap Scheduled Events. The Scheduled Events screen for the thermostat is displayed.

  4. Tap + Create new scheduled event. The New climate scheduled event screen is displayed.

  5. Configure the settings for the climate event:

    • Name: Enter a descriptive name for the climate event.

    • Start : Set the time that the climate event should occur.

    • Active Days: Select the days for the climate event to occur. The default setting is for the event to occur on all days.

    • Set Points : Select the setpoints for Cool , Heat , and Auto  modes.

      NOTE: Depending on the selected mode, the thermostat switches to cooling mode when the room temperature reaches the cooling set point, switches to heating mode when the room temperature reaches the heating set point, or maintains the auto mode set point.

    • Schedule Status: To enable the schedule, select Schedule Enable. New events are disabled by default.

  6. Select Save.

Edit a Scheduled Climate Event

To edit an existing climate event:

  1. Select a thermostat from room.

  2. Tap  Menu and then select Scheduled Events.

  3. Tap the event to edit the thermostat behavior for the climate event.

  4. Configure the settings for the climate event:

    • Name: Enter a descriptive name for the climate event.

    • Start : Set the time that the climate event should occur.

    • Active Days: Select the days for the climate event to occur. The default setting is for the event to occur on all days.

    • Set Points : Select the setpoints for Cool , Heat , and Auto  modes.

      NOTE: Depending on the selected mode, the thermostat switches to cooling mode when the room temperature reaches the cooling set point, switches to heating mode when the room temperature reaches the heating set point, or maintains the auto mode set point.

    • Schedule Status: To enable the schedule, select Schedule Enable. New events are disabled by default.

  5. Select Save.

Copy a Scheduled Climate Event to Another Thermostat

Scheduled climate events can be transferred between thermostats in the system.

To copy a scheduled climate event to another thermostat:

  1. Select a thermostat.
  2. Tap  Menu and then select a scheduled event.
  3. Tap  Menu and and then Copy Event.
  4. Select Copy to Another Thermostat.
  5. Select the desired thermostat and then tap Apply Copy.

Delete a Climate Event

To delete a climate event:

  1. Select a thermostat from the room.
  2. Tap  Menu.

  3. Tap Scheduled Events. The Scheduled Events screen for the thermostat is displayed. The Scheduled Events screen lists the thermostat events that have been created for the thermostat. Each thermostat event provides the time and days that it is scheduled to occur, as well as its cooling and heating set points.

  4. Tap the icon and then Delete.