Tap the Security System tile on the Home screen. The Security screen displays the status of the security system at the top of the screen.
Security system functionality depends on the security system's make and model, configuration, and driver. The information and controls provided for the security system may include keypad emulation, an area list for systems that support areas, area controls to arm or disarm the system (including storing the password on the UI device), programming area arm or disarm events, and triggering area commands from button or trigger events via scenes.
NOTE: To view the features supported by the security system, refer to Security System Configuration.
Select Security System in Home Controls to view the Areas.
The area name, status, and actions are displayed for each area. To initiate an action, tap and hold an action button until the button icon updates.
To view the zone information and additional controls for the area, select the Partition name.
Zone status is displayed. To initiate an action for the security system, tap and hold an action button until the button icon updates.
To view the keypad and additional actions, swipe left.
Use the keypad and direction arrows to control and enter the alarm code.
Additional security system actions are listed below the keypad. To initiate an action, tap and hold an action button until the button icon updates.
To view the zone status and warnings, select Zones from the Zone status page. To bypass a zone, select Bypass.
To view security system warnings, select Show warnings. To view the zones, select Show all.