Intercom

Use the Intercom menu to configure the intercom settings.

Paging

If the touch screen will be used for paging, use the Paging menu to configure the device. The paging settings are specific to each device in the system that supports paging.

To enable or disable paging, use the toggle switch to select On (default) or Off.

When paging is turned off:

  • The Intercom control is not displayed in the Show Controls list.
  • The Intercom tile is not displayed on the Home screen.
  • The device cannot receive pages.

Note: If paging is enabled and the Intercom control is turned off in the Show Controls list, the device can receive a page but it cannot send pages.

Paging Groups

Select the default paging group. The default paging group is used when the Intercom tile on the Home screen is held to send a page. For details, refer to Intercom.

To select the default paging group, select Default paging group and then select a group from the list. The default paging group is Whole House.

Note: If the selected room group is deleted by a dealer using the Crestron Home Setup app, the Whole House group will be set as the default paging group.

Calling

If the touch screen will be used for calling, use the Calling menu to configure the device. The calling settings are specific to each device in the system that supports calling.

To enable or disable calling, use the Calling toggle switch to select On (default) or Off.

To enable or disable automatic call answering, use the Auto Answer toggle switch select On or Off (default).