HR-CV-MINI Remote

The HR-CV-MINI is a durable handheld remote with a simple all-purpose design, customizable buttons for source selection, and voice control capabilities. The HR-CV-MINI may be paired with the Crestron Home® OS for complete control over audio, video, lighting, shades, and other amenities.

Before the HR-CV-MINI can be added to Crestron Home, it must be configured with Device Assistant App. Refer to Getting Started in the HR-CV-MINI product manual for instructions.

Discover in Crestron Home

The HR-CV-MINI is added to Crestron Home as a Wired and Wi-Fi Device. Follow the simplified steps below or refer to Crestron Wired and Wi-Fi Devices for detailed instructions.

  1. Connect the HR-CV-MINI to either the charging dock or to USB power. Ensure the remote is charging.

  2. Open the Crestron Home Setup App. Refer to the Configure a System for reference.

    NoteS:

    • Device Assistant login credentials are required to pair with Crestron Home.

    • The HR-CV-MINI must be connected to power and charging during the set up process.

  3. Select Pair Devices on the Setup screen.

  4. Select Crestron Wired and Wi-Fi.

  5. Select the Ethernet and Wi-Fi icon from the taskbar below.

  6. In the Ethernet and Wi-Fi section, select the HR-CV-MINI to add it to a Crestron Home room.

The HR-CV-MINI is now ready for use in Crestron Home.

Customization

Access the Actions & Events screen to customize the remote. Refer to Customize Actions & Events and the below sections for further reference.

The configurable buttons can be programmed with text through the instructions below.

  1. Navigate to the Labels tab.

  2. Select the button you would like to configure from the remote options on the left.

  3. Add your desired text. Text can be displayed stacked in two lines as in the image below.

Program any desired actions for each button via the Actions tab.

  1. Verify that you have selected the button you want to configure from the remote options on the left.

  2. Click the Mode dropdown menu to choose a pre-configured Crestron Home action to tie to the selected button. For more information on setting up Crestron Home Actions, see Customize Actions & Events.

Configure Light and Shade Control

Light and Shade controls are enabled by default if they are already configured to the Crestron Home room the HR-CV-MINI is linked to. Refer to Configure a System for more information on enabling Shade and Light control into a room.

If Light or Shade control is enabled, the actions and icons of the configurable buttons default to All On/All Off for lights and All Open/All Closed for shades. These buttons cannot be customized or further configured.

  1. Open the Actions tab.

    Note: If the HR-CV-MINI does not display in the Actions tab, close and reopen Crestron Home.

  2. The Enable Light/Shade Control check box is selected by default and can be deselected if necessary. Refer to the image below for reference.

  3. To control shades, cycle to the shades page on the HR-CV-MINI via the icon in the picture below. The two buttons above are now configured as All Open/All Closed.

  4. To control lights, cycle to the lights page on the HR-CV-MINI via the icon in the picture below. The two buttons above are now configured as All On/All Off.

    Note: When lights and shades are paired with the HR-CV-MINI, the configurable buttons above become fixed as All Open/All Closed or All On/All Off and are no longer available for other Crestron Home functions.

Configure Source/Service Selection

Multiple media sources can be linked to the HR-CV-MINI. Video source icons are preloaded into the top bar of the remote. The display bar has the capacity to host ten icons. More than ten sources are able to link to the remote, but only the first ten will display.

  1. Select Build System in Crestron Home. Refer to Source Routes for reference.

  2. Select Source Routes.

  3. Select the Room Name the remote is associated with.

  4. Select Available Sources.

  5. Select each desired source from the list of available services. The Allowed Sources can be clicked and dragged into a desired order that will display on the remote. Refer to the image below and Source Routes for reference.

  6. To control media and source selection, cycle to the media page via the icon in the image below.