AM-TX3-100 Operational Instructions

Before content can be shared with the AM-TX3-100, it must be paired with a Wi-Fi network capable AirMedia receiver via the WiIFi Direct method as described in the Connect Devices section of this product manual.

Share Content

To share content through the AM-TX3-100, plug the AM-TX3-100 into the USB-C port of a compatible personal device.

NOTE: The personal device's USB-C port must be DisplayPort Alt mode compatible.

To pause or resume sharing content, quickly press the Screenshare button twice.

To stop sharing content, press the Screenshare button.

Screenshare Button

Conferencing the AM-TX3-100

If the Peripherals button is green, conferencing will automatically begin.

If the Peripherals button is white, tap the button to begin conferencing.

To stop conferencing, tap the Peripherals button (will turn white).

Peripherals Button

Restoring the Device

To restore the AM-TX3-100 to factory default, perform the following procedure:

  1. Press and hold the Screenshare button.

  2. After two seconds, simultaneously press and hold the Peripherals button.

  3. Continue to hold both buttons until the ring LED turns amber. This takes approximately eight seconds.

The AM-TX3-100 will reboot. All configuration, included pairing, will be reset to default.