Action Menu

The web configuration interface provides an Action drop-down menu. The Action menu may be accessed at any time.

Action Menu

The Action menu provides the following selections.

Save Changes

Once any changes have been made to the receiver configuration, the Action button becomes a Save Changes button. Select Save Changes to save changes to the configuration settings.

If a reboot is required after changes have been saved, select Yes to reboot the device or No to cancel the reboot.

Revert

Select Revert to revert the receiver to the last saved configuration settings.

Update Firmware

To upgrade the device firmware manually with a downloaded PUF (package update file), select Update Firmware. The Firmware Upgrade dialog box opens.

Notes:

When first connected, the device may update automatically.
To push an update manually, visit crestron.com/firmware to download the latest firmware PUF.

Firmware Upgrade Dialog Box

To upload a firmware PUF through the web configuration interface:

Select Browse, and then navigate to the firmware PUF on the host computer.
Select the firmware PUF, and then select Open.
Select Load to load the PUF to the receiver. The upload progress is shown in the dialog box.
Once the device has completed the firmware upgrade, select OK.

Select the x button to close the Firmware Upgrade dialog box. Selecting the x button before the PUF is uploaded to the device cancels the upgrade. Once the PUF upload process begins, the dialog box cannot be closed, and the upload process cannot be canceled.

Restore

Select Restore to restore the device configuration settings to their default values. Select Yes to restore the settings or No to cancel the restore.

NOTE: If the device is restored to factory settings, the default user name and password used to configure the device will be restored as well. Any custom user names or passwords will no longer function.

Reboot

Select Reboot to reboot the device. Select Yes to reboot the device or No to cancel the reboot.

Download Logs

Select Download Logs to download the device message logs for diagnostic purposes. The message files download as a compressed .tgz file. Once the compressed file is downloaded, extract the message log files to view them.

Manage EDIDs (AM‑3200(‑WF)(‑I) Models Only)

Select Manage EDIDs to manage Extended Display Identification Data (EDID) profiles that are installed on the receiver. The Manage EDIDs window opens.

Default EDIDs

Select Default EDIDs to view EDIDs preinstalled on the receiver.

Manage EDIDs - Default EDIDs Tab

Enter text in the Search... field to find and display EDIDs that match the search term(s).

EDIDs are listed in table format. If the EDIDs span multiple pages, use the navigation arrows on the bottom of the page to move forward or backward through the pages, or select a page number to navigate to that page.

Select Close to close the Manage EDIDs window.

User EDIDs

Select User EDIDs to manage EDIDs installed by users.

Manage EDIDs - User EDIDs Tab

Enter text in the Search... field to find and display EDIDs that match the search term(s).

To upload an EDID file:

Select Add EDID.
Select Browse.
Navigate to the EDID file on the host computer.
Select the EDID file, and then select Open.
Select Load to load the EDID file to the receiver. The upload progress is shown in the dialog box.
Once the receiver has completed the upload, select OK.

Select the trashcan button in the Action column to delete the EDID. Select Yes to delete the EDID or No to cancel.

Select Close to close the Manage EDIDs window.

Manage Certificates

Select Manage Certificates to manage any certificates that are installed on the receiver. For more information on certificate management, refer to 802.1x Configuration.

Manage Device Drivers

Select Manage Device Drivers to manage any drivers that are installed on the receiver. The Manage Device Drivers window appears. Support for CEC, Crestron Connected® control, IP, serial, and infrared profiles are built‑in.

Default Drivers

Select Default Drivers to view information for the drivers preinstalled on the receiver.

Manage Device Drivers - Default Drivers Tab

Enter text in the Search... field to find and display drivers that match the search term(s).

Drivers are listed in table format. The following information is displayed for each driver:

Type: The supported display type (flat panel display, projector, etc.)
Manufacturer: The driver manufacturer
Supported Models: The display model name
Communication: The driver communication type (Serial/RS‑232, IR, IP, CEC)
DriverVersion: The version of the installed driver

Select Close to close the Manage Device Drivers window.

User Drivers

Select User Drivers to manage drivers installed by users.

Manage Device Drivers - User Drivers Tab

Drivers are listed in table format. The following information is displayed for each driver:

Type: The supported display type (flat panel display, projector, etc.)
Manufacturer: The driver manufacturer
Supported Models: The display model name
Communication: The driver communication type (Serial/RS‑232, IR, IP, CEC)
DriverVersion: The version of the installed driver

Select Close to close the Manage Device Drivers window.

Add Driver

To upload a driver:

Select Add Driver.
Select Browse.
Navigate to the driver file on the host computer.
Select the driver file, and then select Open.
Select Load to load the driver file to the receiver. The upload progress is shown in the dialog box.
Once the receiver has completed the upload, select OK.

Delete Driver

To delete a driver from the receiver:

Locate the driver that you wish to delete in the driver table, and then select the corresponding checkbox.
Select Delete Driver.
Select Yes to delete the driver.

Import from Cloud

Crestron maintains a cloud‑based driver database. To load drivers to the receiver from the cloud:

Select Import from Cloud.
Enter text in the Search... field to find and display drivers that match the search term(s).
Locate the driver that you wish to upload to the receiver, and then select the corresponding radio button .
Select Add to add the driver to the receiver.

Manage Images

Select Manage Images to add or remove images used as custom logo graphics or custom backgrounds.

NOTE: For more details on using custom logo graphics and custom backgrounds, refer to Connected Devices.

Manage Images

To add an image to the receiver:

NOTES:

Up to 20 images can be loaded. The receiver's storage capacity is 100 MB.
Custom background images should be jpg files with resolutions no higher than 4096 x 2304 pixels. Images with resolutions higher than 4096 x 2304 pixels may exceed the receiver's storage limit when rendered and will inhibit performance.

Select Add.
Select Browse, and then navigate to the image file on the host computer.
Select the image file, and then select Open.
Select Load to load the image to the receiver.
Once the receiver has completed the image upload, select OK.

Select the x button to close the File Upload dialog box at any time during the upgrade process. Selecting the x button before the image file is uploaded to the receiver cancels the upload.

Once the image file is uploaded, the file's name, status, and preview will appear in the Manage Images table.

To remove an image from the receiver, select the checkbox in the corresponding table row, and then select Remove.

Have feedback on this document? Contact docfeedback@crestron.com.

All brand names, product names and trademarks are the property of their respective owners. Certain trademarks, registered trademarks, and trade names may be used to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice.