Touch Screen Operation

A connected touch screen running .AV Framework software can be used to control presentations. Use the touch screen to control volume, switch between sources, and start and stop presentations. The home screen is displayed when the system starts.

Add a Touch Screen

NOTE: The touch screen must be accessible to the receiver over the network.

IP Table Entry

• TSW-570, TSW-770, and TSW-1070 Product Manual (Doc. 8550)
• TS-770 and TS-1070 Product Manual (Doc. 8555)

Load a Touch Screen Project File

• AM‑3100‑WF

• AM‑3100‑WF‑I

• AM‑3200

• AM‑3200‑WF

• AM‑3200‑WF‑I

• TSW-570, TSW-770, and TSW-1070 Product Manual (Doc. 8550)
• TS-770 and TS-1070 Product Manual (Doc. 8555)

Screen Controls

Home Screen

The footer bar provides the same buttons regardless of which screen is selected. Refer to the following tables for more information on footer button functionality.

	The more button navigates to the selection screen.
	The info button navigates to the information screen.
	The volume lower button lowers the device volume incrementally.
	The volume raise button raises the device volume incrementally.

 

Access the System Info Screen

To access the System Info screen, tap and hold the information button on the home screen for 20 seconds.

The System Info screen provides the device IP address, the device hostname, the Crestron Fusion server connection status, the Crestron Fusion room name, the device MAC address, the device serial number, and the .AV Framework version number.

System Info screen

The Function Menu

Function Menu

• Tap Home to display the Home screen.
• Tap Present to view presentation options. For details, refer to Present a Source.
• Tap the back button to return to the previous screen

Room Scheduling

Tap Home to display the home screen. The home screen displays the current status of the room.

Room Available

• The time remaining (in minutes) until the next scheduled meeting occurs

• A RESERVE NOW button that allows an ad hoc meeting to be scheduled through the touch screen

Home Screen – Available Room

Room Reserved

You can use the room for the remaining time available or reserve the room for another time.

Home Screen – Reserved Room

Reserve the Room

1. Tap RESERVE NOW on the home screen. The New Meeting screen is displayed.

   NOTE: RESERVE NOW meetings may only be scheduled for the current day.

   New Meeting Screen

   

2. Tap one of the available meeting end times to set the duration of the meeting. The room can be reserved for up to three lengths:

   • Until the current half hour interval ends (If the current time is 4:44 pm, the end time for this option is 5:00 pm.) This is the default setting.

   • Until the current half hour interval ends plus 30 minutes (If the current time is 4:44 pm, the end time for this option is 5:30 pm.)

   • Until the current half hour interval ends plus 60 minutes (If the current time is 4:44 pm, the end time for this option is 6:00 pm.)

   NOTE: These options are available only if a meeting is not already scheduled during these times.

3. Tap RESERVE NOW to reserve the meeting.

To discard the reservation, tap CANCEL.

Present a Source

If a source is active, a Stop button is shown. Tap the Stop button to stop routing the source to the display.

Present via HDMI

Present via AirMedia

AirMedia Canvas

Control Multiple Sources

1. Connect all sources to the receiver.
2. Tap the first source for presentation. The content will appear on the display device with presentation controls.
   • Select the volume button to mute or unmute the source's volume.
   • Select Stop to dock the presentation. When docked, the source stops presenting but remains connected to the display. Select the play button to resume presenting. When resuming a presentation, a permission request is sent to the source device. The request must be accepted before the presentation resumes.
   • Select the disconnect button to disconnect the source from the receiver.

   

3. Tap < Presentation Types. The touch screen will show the connected source with the presentation controls detailed in the previous step.

   

4. Tap the second source for presentation. The display device will show the two sources side by side.

   NOTE: The dock control feature will be implemented for Apple® devices in a future release. Select the disconnect button to end the presentation and disconnect the source device.

   

5. Tap < Presentation Types. The touch screen will show the two connected sources side by side.

   

6. (Optional) Tap more sources to present as needed. The touch screen will show all connected sources side by side, and the presentations will be arranged on the display device.

   NOTE: If the maximum amount of presenters is reached and another source is selected, then the first source will be docked (AirMedia user) or disconnected (hard wired inputs, AirPlay connection, or Miracast connection) and the latest source will take its place on the display. When docked, the source stops presenting but remains connected to the display. To adjust the maximum amount of sources that can present simultaneously, refer to General Settings

Switch to Single Source

When two sources are shown on the display device, tap Stop to remove the source's presentation from the display device. The remaining source will be presented in full screen.

Swap Sources

When more than two sources are shown on the display device, the Swap Sources button is unavailable.