DM-NAX-8ZSA

This section describes how to configure the DM-NAX-8ZSA.

Web Interface Configuration

The DM‑NAX‑8ZSA web interface allows you to view status information and configure network and device settings.

Access the Web Interface

To access the web interface, do either of the following:

The web interface is accessed from a web browser. The following table lists operating systems and their corresponding supported web browsers.

**Operating System and Supported Web Browsers**
OPERATING SYSTEM	SUPPORTED WEB BROWSERS
Windows® operating system	Chrome™ web browser, version 31 and later Firefox® web browser, version 31 and later Internet Explorer web browser, version 11 and later Microsoft Edge web browser
macOS® operating system	Safari® web browser, version 6 and later Chrome web browser, version 31 and later Firefox web browser, version 31 and later

Access the Web Interface with a Web Browser

Enter the IP address of the DM‑NAX‑8ZSA into a web browser.

NOTE: To obtain the IP address, use the Device Discovery Tool in Crestron Toolbox™ software or an IP scanner application.
If you are creating a user account for the first time, do the following; otherwise, skip to step 3.
1. Enter a username in the Username field.
2. Enter a password in the Password field.
3. Re-enter the same password in the Confirm Password field.
4. Select Create User. The Device Administration page appears.
Enter the username in the Username field.
Enter the password in the Password field.
Select Sign In.

Have feedback on this document? Contact docfeedback@crestron.com.

All brand names, product names and trademarks are the property of their respective owners. Certain trademarks, registered trademarks, and trade names may be used to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice.