Access the Web Configuration Interface

To access the web configuration interface for the Automate VX, open the browser on Automate VX. The web configuration interface loads automatically.

To access the web configuration interface from a different device:
  1. Enter the IP address of the Automate VX with port 4443 appended to the address (for example, "https://10.1.10.31:4443")

    2. A login page is displayed.

    Login Page

  2. Enter the login credentials for the system. For access to the administrator account (to edit Room Configuration files and settings), use the username admin. If the system is in the factory default state, Automate VX will prompt you to create a new password.
  3. Select Login.

The web configuration interface is displayed with the Main tab open by default. To access Room Designer from the Main tab, select the pencil icon in the top right of the menus.

Main View to Room Designer

The Room Designer page is displayed.

Room Designer Default Page

Refer to the following sections for information on how to configure a project within Room Designer.