myCrestron Residential Monitoring Service

Use the myCrestron Residential Monitoring Service (RMS) to back up and download configurations, view logs, and generate Deploy Codes for Crestron Home processors.

Crestron Technical Institute Training Video:
MyCrestron

Accessing myCrestron Residential Monitoring Service

To access myCrestron RMS, go to portal.my.crestron.com.

Accessing myCrestron Residential Monitoring Service portal and the Crestron Home Configurator requires the following:

The user must be a Crestron residential dealer.
The dealer must be subscribed to the myCrestron Residential Monitoring Service.
The dealer administrator must provide the user access to the myCrestron Residential Monitoring Service portal.

Subscribing to myCrestron RMS

Dealer administrators can subscribe to myCrestron RMS by following the instructions below.

Log in to Crestron.com as an administrator.
Select .
Select Administration.
Select Application Access.
Review the terms of use and select Yes.
Select Register.

Your dealership is now subscribed to myCrestron RMS.

Setting Employee Permissions

Dealer administrators can provide myCrestron RMS access to other employees by following the instructions below.

Log in to Crestron.com as an administrator.
Select .
Select Administration.
Select Application Access.
Scroll down to Manage Application Access For.
Select the + to expand the list.
Select any employees that should have myCrestron RMS access.

The selected employees can now access myCrestron RMS.

Configuration Backups

The Crestron Home system automatically backs up the system configuration and log files and stores them in the myCrestron Residential Monitoring Service.

System configuration backups contain settings for the control system, devices, and drivers that are required to completely restore the system, including third-party driver settings that are stored in the /user/Data/ThirdParty/ folder.

Managed Devices

Processors in the Device List display the Crestron Home OS firmware version, connection status, and device status.

To view the managed devices, select Devices.

Processor Version

To quickly determine if a CP4-R or MC4-R is Version 1, note the orange V1 icon:

Note: The V1 icon requires firmware version 3.21 or later.

Crestron Home version 4.07 was the final feature update supported by Version 1 hardware.

For details, refer to the following:

Status

The processor status is indicated by the color of the device box in the device list:

Green: The processor is online.
Red: The processor is offline
Purple: The reboot command was initiated from the myCrestron Residential Monitoring Service and the processor is waiting to restart. The device status updates when the processor initiates communication with myCrestron.
Yellow (missed communication): The processor has not communicated with myCrestron for 40 minutes.
Yellow (partially online): The processor is online but an ancillary device is offline.
Blue: The processor is not monitored.

Select a device in the Device List to view the device details. The device details such as the Crestron Home OS firmware version, hostname, MAC address, last reboot reason and time, IP address, and Deploy code.

Note: The Deploy code is displayed after it is created. To generate a Deploy code, refer to Generate a Deploy Code.

Firmware Update

Update the firmware for the Crestron Home processor through the myCrestron RMS. When an update is available, the Update is displayed and the available firmware is displayed in the device details.

To update firmware:

Select a device in the Device List.
To view the release notes for the firmware, select What's New.
Select Update Available and then confirm the update.
1. Downgrade: A notice is displayed indicating that the configuration on the processor is not compatible with the firmware and that the configuration will have to be recreated or restored. To downgrade the firmware, select Proceed.
2. Upgrade: A notice is displayed indicating that the firmware will be updated. To update the firmware, select Yes.
3. Beta Firmware: A notice is displayed indicating that prerelease firmware will be installed and that the software should not be installed on live systems. To update to beta firmware, select Yes.
The update status is displayed below the device details.

Add the Crestron Home Processor

To add the processor to the myCrestron Residential Monitoring Service:

Go to portal.my.crestron.com.
Select Devices and then Add Device.
Enter the required information.
- Device Name: Enter a descriptive name for the Crestron Home processor.
  
  NOTE: To obtain the Device MAC Address and Device Key, select Settings >System Configuration > myCrestron RMS Services.
- Device MAC Address: Enter the MAC address.
- Device Key: Enter the registration code. In Configure Pro, this can be found on the Settings > About page.
- Add to Group: (Optional) To add the Crestron Home processor to a group, select a group or select Add and then create a group.
- Monitor the device: Select to turn on remote monitoring for the Crestron Home processor.
- Ancillary Device: (Optional) Select any ancillary devices that are connected to the Crestron Home processor.
Select Save.

The processor is now available in the RMS.

Release Processor Ownership

Release Ownership can be used to remove a processor from the RMS, enabling it to be added again.

Select a device in the Device List.
Select the Other tab.
Select Release Ownership.
Follow the prompts to release the processor.

Generate a Deploy Code

Generate a Deploy Code that can be used when replacing or restoring a Crestron Home processor.

To generate a Deploy Code:

Go to portal.my.crestron.com.
Select Devices and then select a processor.
The Deploy Code is displayed in the system information. If the deploy code is not shown or to create a new Deploy Code, select Generate Deploy Code.

NOTE: The deploy code expires after 14 days.

Download Backup Files

Download backups of system configurations, golden configurations, log files, and plog files from the myCrestron Residential Monitoring Service.

Note: To manually back up configuration and log files, refer to Configuration Backups.

To download backup files:

Go to portal.my.crestron.com.
Select Devices and then select a processor.
In the Actions menu, select Download Backup.
Select Expand for the control processor to display the configurations and log files that are available for download.
Select configuration or log files to download.
To download the files, select Download Files and then Yes.

Restart the Processor

To restart a processor:

Select Devices and then select a processor.
Select Other.
Select Reboot Device and then select Proceed to confirm. A toast message displays the time that the device will restart.

Troubleshooting

This section contains troubleshooting steps to correct issues with the myCrestron Residential Monitoring Service. If further assistance is required, contact Crestron True Blue Support.

Offline or Missed Communications

The processor is not connected to the internet or the program is not running.

Cannot Connect to the Internet

Check the connection to the DNS.
Ping a known IP address.

Program is Not Running

Restart the control processor.

Does not come online after restart

The processor is offline or missed communications. Go to Offline or Missed Communications.

Partially Online

The ancillary device is offline or there is a communications issue between the processor and the ancillary device.

Ancillary Device is Offline

Check the network wiring.
Restart the ancillary device.

Communications Issue

Check the network wiring.
Restart the control processor.

Integration Report

Generate a complete system report, including all connected devices and functions, by selecting Integration Report. Allow all processor information to load before generating the report.

Note: This report is required to program SIMPL Intregration Modules. For details, refer to Crestron Home SIMPL Integration Modules.

To generate a PDF report, select Export to PDF.

To generate an XLS report, select Export to XLS.

The report can be filtered by rooms and device types. Select the Rooms or Types fields, then check the desired filters. Select Generate Report to create the filtered report.

Example Integration Report Page

Have feedback on this document? Contact docfeedback@crestron.com.

All brand names, product names and trademarks are the property of their respective owners. Certain trademarks, registered trademarks, and trade names may be used to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice.